DO-178C Objectives list

If you are looking for the DO-178C objectives list for an upcoming job interview, you have landed at the right place.

In this article, I have put together all the DO-178C objectives list in one place for your reference. These DO-178C objectives list-based questions are commonly being asked in most aerospace companies for entry-level and experienced level positions. I have spent many hours compiling this.

So, I hope you will enjoy this article – DO-178C Objectives list. I hope this would be helpful for both fresher and experienced professionals.

After reading the complete article if you think that I have missed any other aspects, please write in the comment box. It will be definitely helpful for others. Good luck with your interview!

Q1) Can you list the objectives of the Software Planning Process in DO178C?

The objectives of the Software Planning Process are defined in the DO 178C Table A-1. There are 7 objectives for the software planning process and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable to Software Levels – A, B, C, and D. But, Objective #2 is only applicable to Software Levels – A, B, and C. There are no objectives defined for Software Planning Process for Level-E software in DO-178C.

DO-178C Objectives list DO 178C Table A-1: Software Planning Process
DO 178C Table A-1: Software Planning Process

Q2) Can you list the objectives of the Software Development Process?

The objectives of the Software Development Process are defined in the DO 178C Table A-2. There are 7 objectives for the software development process and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable to Software Levels – A, B, C, and D. But, Objective #4 is only applicable to Software Levels – A, B, and C. There are no objectives defined for Software Development Process for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-2: Software Development Process
DO 178C Table A-2: Software Development Process

Q3) What is DO 178C Table A-3?

The DO 178C Table A-3 contains the objectives of the “Verification of Outputs of Software Requirement Process”. There are 7 objectives in Table A-3 and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable for Software Levels – A, B, C, and D. But, Objective #3 is only applicable for Software Levels – A, and B. There are no objectives defined for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-3: Verification of Outputs of Software Requirement Process
DO 178C Table A-3: Verification of Outputs of Software Requirement Process

Q4) What is DO 178C Table A-4?

The DO 178C Table A-4 contains the objectives of the “Verification of Outputs of Software Design Process”. There are 13 objectives in Table A-4 and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable for Software Levels – A, B, and C only. But, Objective #13 is applicable for Software levels – A, B, C, and D. There are no objectives defined for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-4: Verification of Outputs of Software Design Process
DO 178C Table A-4: Verification of Outputs of Software Design Process

Q5) What is DO 178C Table A-5?

The DO 178C Table A-5 contains the objectives of the “Verification of Outputs of Software Coding and Integration Process”. There are 9 objectives in Table A-5 and the applicability of the objective depends on the software level.

For example, Objective #8 in the below table is applicable for Software Levels – A, B, C, and D. But, Objective #3 is only applicable for Software Levels – A, and B. There are no objectives defined for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-5: Verification of Outputs of Software Coding and Integration Process
DO 178C Table A-5: Verification of Outputs of Software Coding and Integration Process

Q6) What is DO 178C Table A-6?

The DO 178C Table A-6 contains the objectives of the “Verification of Outputs of Integration Process”. There are 5 objectives in Table A-6 and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable to Software Levels – A, B, C, and D. But, Objective #4 is only applicable to Software Levels – A, B, and C. There are no objectives defined for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-6: Verification of Outputs of Integration Process
DO 178C Table A-6: Verification of Outputs of Integration Process

Q7) What is DO 178C Table A-7?

The DO 178C Table A-7 contains the objectives of the “Verification of Verification Process Results”. There are 9 objectives in Table A-7 and the applicability of the objective depends on the software level.

For example, Objective #1 in the below table is applicable for Software Levels – A, B, and C. But, Objective #5 is only applicable for Level – A software. There are no objectives defined for Level-E software in DO 178C.

DO-178C Objectives list DO 178C Table A-7: Verification of Verification Process Results
DO 178C Table A-7: Verification of Verification Process Results

Q8) What is DO 178C Table A-8?

The DO 178C Table A-8 contains the objectives of the “Software Configuration Management Process”. There are 6 objectives in Table A-8 and the applicability of the objective depends on the software level.

In the case of Table-8, all the objectives are applicable for Level-A, B, C, and D software. There are no objectives defined for Level-E software in DO 178C.

DO 178C Table A-8: Software Configuration Management Process
DO 178C Table A-8: Software Configuration Management Process

Q9) What is DO 178C Table A-9?

The DO 178C Table A-9 contains the objectives of the “Software Quality Assurance Process”. There are 5 objectives in Table A-9 and the applicability of the objective depends on the software level.

For example, Objective #2 in the below table is applicable to Software Levels – A, B, C, and D. But, Objective #1 is only applicable for Software Levels – A, B, and C. There are no objectives defined for Level-E software in DO 178C.

DO 178C Table A-9: Software Quality Assurance Process
DO 178C Table A-9: Software Quality Assurance Process

Q10) What is DO 178C Table A-10?

The DO 178C Table A-10 contains the objectives of the “Certification Liaison Process”. There are 3 objectives in Table A-10 and the applicability of the objective depends on the software level.

In the case of Table-10, all the objectives are applicable for Level-A, B, C, and D software. There are no objectives defined for Level-E software in DO 178C.

DO 178C Table A-10: Certification Liaison Process
DO 178C Table A-10: Certification Liaison Process

Conclusion:

DO178C is a very important guideline document for any airborne software. I have tried to put together all the DO-178C Objectives list in one article. I hope that this article would help you in understanding the DO-178C for each software level.

However, there could be areas that I might have missed here. Please feel free to comment below, if you think you need further explanation for the DO-178C objectives list.

Here is the summary of all the tables mentioned in the DO 178C document.

DO-178C Objectives list

I have also compiled another detailed DO-178C objectives list table in one document along with the explanation and created a pdf copy of it.

If you want to get the FREE pdf copy, please comment your email ID in the below comment box, I will send you the copy. This document would definitely give you a far better understanding of the objectives of DO 178C.

Hopefully, this article could help you!

Good luck with your interview.

Cheers!

DO-178C Objectives List | Must Read

11 thoughts on “DO-178C Objectives List | Must Read

Comments are closed.

Scroll to top
error: Content is protected !!